Phillips grow light bulbs are very popular on Amazon. I feel these complaints though, are flukes and are not overall indicators of the quality of Philips CFls. The reason for my above assertion is that Phillips CFLs have a very high overall rating for longevity and packaging. Because of these high ratings, I am confident that the issue of the CFLs dying out too soon or sub-standard packaging is not a trend, and you should feel confident buying them.
In conclusion, based upon the overwhelmingly positive and thousands of reviews, you cannot go wrong buying Phillips CFL bulbs. At least online, I do not recommend that you purchase these reviewed Sylvania CFls. The reason for this is two-fold; lack of reviews and a high number of reviews where customers complained that they received a defective product.
CFL grow lights are a good choice for the hobbyist, newbie grower, or for those that only want to grow one or two plants. However, if you are going to be growing more than two marijuana plants; it is highly recommended that you look into LED grow lights.
The main reason for my recommendation is that Phillips has over 1, overall positive reviews. Additionally, Phillips CFLs, have a high overall rating for issues concerning brightness, packaging, etc.
So, based on the number of reviews, and the highly positive reviews, the Phillips CFL bulb is recommended. CFLs contain a small amount of mercury. Mercury is not released, when a CFL grow light is on. However, mercury contamination can occur if a CFL bulb is broken or disposed of incorrectly.
Also, exposure from a CFL grow lights breaking could cause mercury poisoning for the consumer if the broken CFL bulb contaminates the product. While the wattage of the light produced by the CFL bulbs is more important than the spectrum of light , optimizing the spectrum is a good idea. The best CFL for vegetative growth will be somewhere around K.
A softer spectrum around K will be a good choice for a CFL flowering bulb. This advice is more about how to set up CFL grow lights in a perfect world. As mentioned, the coverage of one CFL bulb will only produce enough light exposure to about 12 inches away from the bulb itself. Topping your plants and tying them to grow more laterally is the best way to ensure your plant can grow large without being too tall for CFL full spectrum grow bulbs. If you are trying to do a single CFL grow operation with only one bulb, you need a small plant that flowers quickly, like an autoflower variety.
Keep in mind that the yield of cannabis will be low with this setup. As I earlier indicated, different plant growth stages require different spectrums of light. By using the Kelvin scale, you can measure the color temperature that CFL bulbs emit and know which one you need depending on the growth stage of the marijuana. Here is a quick breakdown of the type of CFL grow light you need to get. Bulbs that lie in between this stage have a warm light that resembles the sun. It is best suited for the flowering phase of the plant.
During this stage of growth, the seed starts to spread in preparation for another set of new plants. The bulbs that lie in this range are quite often not very optimal for use in the vegetative or the flowering stages of a plants life cycle. You can use only or two bulbs from this range as a supplement to the vegetative and flowering range.
The bulbs from this range are the best to use in the vegetative phase of the plants. In this phase, plants start forming leaves and grow very fast to get to the flowering stage. Daylight CFL bulbs are the best types to begin a plant growing life cycle. Since they are also not as strong as HPS or HID, you can place them closer to the plants without the fear of burning the plants.
CFL grow lights do not require the use of external ballasts making it very easy to set up the lights. All you need to do is fix the bulb in the fixture, and you are ready to go. CFL grow lights generate less heat compared to the traditional sources of light for indoor plants. It, therefore, allows you to place the bulbs close to the plants at a distance of 6 to 12 inches without causing any burning to the plants. You can easily adjust the mounting length in regards to the needs of your plants.
The low heat generated by the CFL grow light allows you to save money that you would otherwise require to purchase a cooling system. The bulbs come with standard sockets. You do not need to buy any fancy accessories to connect the lamp, all you need to do is connect to a standard light fixture. CFL grow lights are very cost friendly when you compare them to the other types of grow light in the market.
The design of CFLs makes it easy to set them up without the need of acquiring any special equipment. Even then, you need to have some essential items to get started. If you want to set up your indoor marijuana garden, you have to invest in a few startup supplies. However, the cost of items gradually goes down with each growth cycle your complete and start again. You need to decide on the hydroponic tray you want to use for your plants and the growth medium to use. To select the best grow tray, you first need to identify the hydroponic system you intend to use.
Choose one that is long lasting and durable so that you may cut costs on continuous replacements. There are different types of growth mediums available today. Read on to learn more about that. Because of this, they also require special disposal to avoid sending mercury into landfills.
When it comes to growing cannabis, there are two types of CFL bulbs to consider: daytime or daylight and warm white or soft white. The difference between these two types of bulbs is their color temperature, and color temperature needs change as the plant matures. If you think about your lighting game as trying to mimic the natural cycle of sunlight, then it would make sense for plants to need a stronger and more intense light early in their life when they'd be happily growing out in the summer sunshine.
That's the daylight CFLs. Then, during the flowering stage, your plants will benefit from the gentler soft white CFLs since out in nature, summer would be turning to fall when sunlight becomes weaker. In an ideal setup, you should be using both types of bulbs to meet the needs of your plants at different stages of their life cycle: daylight for the vegetative stage and warm white for the flowering stage. The answer depends on where you live. As of this writing, the fate of CFLs is unclear due to some backtracking by the Department of Energy around efficiency requirements for light bulbs that were supposed to come into effect back in The matter is currently being litigated and, much like cannabis laws, there is a patchwork of regulation that varies by state.
Compact fluorescent light bulbs do contain a small amount of mercury, and mercury can be dangerous. On the plus side, manufacturers have drastically decreased the amount of mercury they use in CFLs and are trying to reduce that amount even further. The only real risk CFL bulbs pose is if you smash them. When that happens, the mercury vapor escapes and it could pose a risk to you, other humans, and pets.
0コメント