It was bad news unfortunately Sent my original pride and joy PS3 for a repair after it got the dreaded ylod. By Chris S. From dead to silent running The team went above and beyond. By James M. Sheffield, United Kingdom on 15 Jan. Went above and beyond So helpful in keeping me up to date, fixing an additional fault, all at an excellent rate.
PS3 - Disc PS3 Hard PS3 Damaged PS3 Liquid PS3 Fault Xbox Slim PS Tray Not PS4 diagnose option Please select this option if the fault you have with your console is not All best sellers.
Step 12 Now delicately pull on the cable in order to remove it from its connector. Step 13 As indicated in the photos, use the nylon spudger to delicately lift the latch.
Step 14 Now gently grasp the power board cable and remove it from its connector. Step 15 Unscrew the 2 cross headed screws circled in red in the photo. These secure the power board to the internal frame of your PlayStation 3 Fat. Step 16 Now grasp the power board and remove it from its placement.
Step 17 Unscrew the 2 screws circled in red in the photo. Step 18 You can now grasp and remove the bracket for the power supply board from its placement.
Step 19 Now unscrew the 6 cross headed screws circled in red in the photo. Step 20 Now remove the hard drive access door using the nylon spudger. Step 21 Lift the internal frame metal structure in order to remove it entirely. Step 22 Delicately unplug the power supply cable AC-In on the back of the power supply block.
Step 23 Unscrew the cross headed screw circled in red in the photo. Step 25 Delicately unplug the power supply cable DC-In on the front of the power supply block. Step 26 Unscrew the 5 cross headed screws circled in red in the photo. These secure the metal power supply block to the internal frame of your console.
Step 27 Delicately lift the power supply block to remove it from its place. Step 28 As indicated in the photos, use the nylon spudger to unclip the two plastic brackets. Don't try to remove the front panel of your PS3 now, it's still attached by other brackets.
Step 29 Turn over your PlayStation 3. Step 30 Unclip the final bracket on the left holding the rear panel to your PS3. Step 31 Now, very delicately, lift off the rear panel. You shouldn't feel any resistance. Step 32 With the nylon spudger move the fan cable delicately out from under the black plastic clip.
Step 33 Unplug the fan from the power supply. Step 34 Unscrew the 4 cross headed screws circled in red in the photo. Step 35 Remove the first support bracket using the nylon spudger. Step 36 Do the same for the second bracket. Step 37 Now lift the radiator heat sink up to delicately remove it from its placement. Step 38 Using a nylon spudger, delicately lever up the antenna connector in order to disconnect it. Step 39 Move the antenna cable aside to prevent it interfering with future steps.
Step 40 Now use the cross headed screwdriver to unscrew the 4 screws circled in red in the photo. Step 42 Using the nylon spudger, lift the latch for the connector carefully, releasing the cable. Step 43 Then disconnect the cable carefully, no resistance should be felt during this step. Step 45 Now lift the mother board in order to remove it completely.
Step 47 With a clean cloth, now clean off the thermal paste residue. Step 48 Do step 46 again, applying a few drops of ArctiClean 1 solution on the second processor graphics. That's so awesome that you can fix Playstations.
I think I will personally abstain, but I could see this information being extremely helpful to someone braver than I. Reply 7 years ago. By Ludvic Youtube Channel Follow. More by the author:. I will show you how to solve the problem , spending is really lowl : -Pasta thermal -Gun Heater -various screwdrivers and torx key -a little patience : I leave here my video if you want to see every step or in alternative follow my instructables.
Hard Disk: 1 remove the plastic cover for extract the hard disk Plastic Cover: 2 remove the screw under the little rubber and slide the cover. For remove the Blue ray player you have disconect only 2 connectors you can see in the yellow circle. Now it's the time for power supply. For controller board remove the 2 screw and the silver flat after remove the 10 screw for remove the stell frame.
Turn your playstation and Remove the 6 screw and the 2 connector for remove the fan. Now begins the most delicate part of the tutorial.
0コメント