Those of all ages enjoy buying their kits, creating their own racers, and seeing how they stack up against the competition both in their areas and across their countries.
There are so many different questions to be asked and answered regarding these miniature vehicles that it would take a dissertation to cover it all. But one of the most important questions that RC enthusiasts want to know is just how long the engines in these nitro cars last.
So, what can you expect? There are a ton of factors that go into the life expectancy of an RC nitro engine. As is the case with anything else in life, it all comes down to just how well one takes care of it.
So in short, the main step you need to take if you are planning to store your nitro fuel for a long period of time is to make sure the storage conditions are good. Proper storage conditions will help you preserve your nitro fuel in good condition for future use.
Ideally the RC nitro fuel can stay in its perfectly normal state for almost 20 to 30 years if stored well but often you will not be able to keep the fuel from getting moisture in it for that long. Many people have reported using fuel that was decades old without any issues while other people have said that fuel will only last then years before going bad.
This variance could certainly be because of the way the fuel was stored but it could also be that fuel in different climates handle the time in storage differently as well. Basically you can assume that as long as you have stored the fuel properly it will last you multiple years without any problem and if it lasts you longer then it is just a bonus! Remember, storage is the main point here.
Next time you go to buy any amount of nitro fuel, you can buy large quantities and not be worried about what you will do with the fuel that will be left over now that you know you can store it for future use. So go ahead and get your fuel! Just make sure that the gallon or can or tank used to store the RC nitro fuel is sealed tightly and that it is stored in a cool dry place away from the sun.
I love to spend time with my wife and 3 kids. There is no better way to get them off the couch and outside than for us to grab the RC cars or boat and enjoy the sunshine! In an engine, there are lots of rotating parts. And as these parts are rotating, they will start to wear due to friction. The main purpose of lubricating oil is to make all the parts run smoothly and reduce engine wear. Lubricants have a higher flash point and are resistant to breaking down even at extreme temperatures. In the past, hobbyist RC racers used to use castor oil as the lubricating oil in their nitro engine fuel recipe.
It has good lubrication properties but it leaves a gummy castor polymer residue. The concentration of lubricating oil in the fuel mixture can vary depending on the usage purpose.
For RC racers, their main priority is engine power. As a result, their fuel is going to contain less amount of lubricant so that the engine can get the most amount of methanol and nitromethane mixture. Less lubricant concentration means that the engine will wear much faster. And as a result, its lifespan will decrease significantly. Fuel mixture is another factor that influences the lifespan of nitro engines. A lean mixture can make it overheat.
This can cause the engine parts to fail, consequently reducing the lifespan of your nitro engine. Too rich fuel mixture is also bad. It can decrease the efficiency of the engine as excessive unburnt fuel will come out of the exhaust. As mentioned before, nitro engine fuel contains methanol, nitromethane, and lubricant oil. Among them, nitromethane is highly explosive. If the concentration of nitromethane in the fuel is too high, it can cause abnormal combustions inside the engine.
It will produce excessive heat and pressure inside the combustion chamber. This can potentially damage the parts of the engine and eventually lead to engine failure.
Radio-controlled nitro engines offer a tremendous amount of speed and performance in a small package. However, their operating tolerance is very tight. This is why you will need to take extra care of your engine to avoid any sort of premature demise. These tips are given below:. Wrap small parts in balloons to protect them and marinate others in waterproofing solutions.
Also, be sure to access the smaller pieces and wire connections to be as thorough as possible. In order to protect the engine and all the other parts, the RC car needs to be cleaned of all debris like sand, dirt, grasses, and mud.
Dampness is a threat, so you have to dry all the parts carefully. Brush off excess debris and wipe everything as clean as possible. Use compressed air to help the car dry, or be sure to leave it out until it dries naturally.
If you buy the whole package, car, and nitro engine, always purchase quality products and maintain them properly for a satisfying experience.
Below are a few well-reviewed options for high-quality RC nitro Cars intended for adult and teenager use from Amazon. Most engines hold less than 3 ounces With an electric RC car, you would be swapping out rechargeable batteries every minutes, and they take far longer to recharge than it takes to refuel. This page contains affiliate links, As an Amazon Associate, I earn from qualifying purchases with no extra cost to you.
0コメント